Lake Country CCS Dual Action Foam Pads
Lake Country CCS Dual Action Foam Pads
CCS stands for Collapsed Cell Structure. CCS Technology is Lake Country’s innovative pad design that saves product by controlling product release onto the work surface. Dozens of dimples in the foam collect excess polish and reserve it until it is needed on the pad’s face (the area that is in contact with the paint). This design prolongs your working time and reduces product waste.
Slows rate of polish absorption – As discussed above, the pads are slow to absorb products and therefore the paint benefits from a longer working time. The same is true of liquid waxes and sealants.
Improves operator control – CCS pockets gradually release polish as needed by the operator. Since these areas are not absorbing polish, they serve as little reservoirs until the excess polish is needed.
Prevents pad skipping – CCS pockets reduce surface tension allowing the operator to run pad flat on a working surface. Basically, the CCS pockets break up the smooth surface of the foam to eliminate the sticking and skipping that occurs when two perfectly flat surfaces meet.
Creates less heat – CCS pockets provide several points where the foam is not completely touching the paint. This reduces friction and therefore heat generated between the pad and the paint.
OEM approved - OEM tests confirm CCS pads out-perform convoluted pad designs.
The Lake Country CCS Foam Pads are a perfect fit on dual action polishers and orbital air sanders with a 3 inch or 5 inch backing plate.
Lake Country CCS Dual Action Foam Pads are available in these foam compositions:
Featured Category Products
£5.99
The Lake Country Blue Final Finishing Spot Pad is designed for applying sealants and glazes. the soft absorbent Blue Final Finishing Spot Pad will not scratch clear coated or single stage paint finishes. The Lake Country Blue Final Finishing Spot Pad can also be use for final finishing and product removal.
£5.99
The Lake Country Orange light Cutting Spot Pad is designed for applying polishes, swirl removers and fine compounds. The Orange Light Cutting Pad is suitable for the repair of swirl marks, water spots, light to moderate oxidation and minor scratches.
£5.99
The Lake White Polishing Spot Pad has a very light cutting power in order to clean paint, and is intended for use with pre wax cleaners and fine polishes. The White Polishing Spot Pad is safe on clear coat or single stage finishes.
£5.99
The Lake Country Yellow Cutting spot Pad is designed to remove heavy oxidation and repair most moderate to severe swirl marks and scratches. Use the Yellow Cutting Spot Pad with compounds and heavy cut swirl removers.
£9.99
The Lake Country Blue Final Finishing Pad is designed for applying sealants and glazes. the soft absorbent Blue Final Finishing Pad will not scratch clear coated or single stage paint finishes. The Lake Country Blue Final Finishing Pad can also be use for final finishing and product removal.
£9.99
The Lake Country Orange light Cutting Pad is designed for applying polishes, swirl removers and fine compounds. The Orange Light Cutting Pad is suitable for the repair of swirl marks, water spots, light to moderate oxidation and minor scratches.
£9.99
The Lake White Polishing Pad has a very light cutting power in order to clean paint, and is intended for use with pre wax cleaners and fine polishes. The White Polishing Pad is safe on clear coat or single stage finishes.
£9.99
The Lake Country Yellow Cutting Pad is designed to remove heavy oxidation and repair most moderate to severe swirl marks and scratches. Use the Yellow Cutting Pad with compounds and heavy cut swirl removers.
